Model | RES-10RT 13.8KWh 5KW | RES-20RT 20KWh 10KW |
Energy Capacity | 13.8KWh | 20KWh |
Cell Configuration | LiFePO4 16S1P | LiFePO4 16S1P |
Battery Module Configuration | 51.2V135Ah, 2 modules in parallel | 51.2V135Ah, 3 modules in parallel |
Inverter Type | Single phase inverter, PV charge & Grid(Generator) charge with AC sine wave output. | |
Inverter Output Mode | Mains electricity bypass and inverter output; uninterrupted power supply. | |
Rated Output Power | 5KW Pure Sine Wave 230Vac | 10KW Pure Sine Wave 230Vac |
Charging Modes | PV Only, Mains Electricity Priority, PV Priority and PV&Mains Electricity hybrid charging. | |
Rated Hybrid Input Power(PV+AC) | 5.5KW | 11KW |
Switch Time (bypass and inverter) | 10ms(Typical Value) | |
Efficiency | AC Discharge>92%, AC Recharge >95%, 99.9% MPPT capture efficiency | |
Protocol | RS485/RS232/CAN | |
BMS | Over-voltage, Low-voltage, Temperature control,Overload and AC short circuit protection, Surge protection | |
Operating Temperature | Charging temprature 0℃~ 45℃; Discharging temperature﹣10℃ ~ 45℃ | |
Ingress Protection | IP54 | IP54 |
Cycle Life | >5,000 Cycles | |
Warranty | Inverter 2 Years, Battery 5 Years | |
Dimension (W/D/H) | 59*59*128 cm | 59*59*168 cm |
Net Weight | 160KG | 250KG |